Aluminium Brazing Rods – Low Temperature Aluminium Welding Filler Rods

Premium Aluminium Brazing Rods – Buy Online at feelandeal.com

Simplify your aluminium repair, HVAC, and radiator welding jobs with premium Aluminium Brazing Rods brought to you by feelandeal.com. Specially designed for smooth flow at lower temperatures, these filler rods form strong, leak-free, and ductile bonds on pure aluminium and various aluminium alloys without melting the base metal.

Key Features & Benefits:

• Low Melting Temperature: Easily melts at low brazing temperatures, preventing burn-through or warping on thin aluminium tubes and sheets.

• Superior Leak-Proof Sealing: Provides excellent capillary action that penetrates deep into joints for airtight and pressure-resistant sealing.

• Corrosion & Crack Resistance: Delivers high tensile strength joints that resist vibration, thermal stress, and atmospheric oxidation.

• Wide Range of Applications: Perfect for AC condenser repair, intercoolers, automotive radiators, aluminium piping, and general fabrication.

• Smooth & Clean Finish: Creates neat, burr-free welds with minimal post-weld cleanup required.

Technical Specifications:

• Product Name: Aluminium Brazing Rods

• Store: feelandeal.com

• Material Composition: Aluminium Silicon Alloy (Al-Si Series)

• Melting Range: Approx. 450°C – 580°C

• Standard Rod Length: 500 mm

• Available Diameters: 1.6mm, 2.0mm, 2.4mm, 3.2mm

• Required Flux: Aluminium Brazing Flux Paste / Powder required for non-flux cored variants

How to Use: Thoroughly clean the aluminium surface using a wire brush or emery paper to remove surface oxide layer, dirt, and grease. Apply appropriate aluminium flux to the joint area if using solid rods. Heat the base aluminium material evenly using a propane or oxy-acetylene torch until it reaches brazing temperature. Touch the Aluminium Brazing Rod to the heated joint (do not melt the rod directly in the flame) and let the alloy flow smoothly into the seam. Allow it to air-cool naturally.